Hi Team,
I’m not sure the connection between ADS8568 and DSP (e.g. TMS320C6657)by UPP terminals. Could you check for it ?The connection I thought as follow:
DB0~DB0 connect to UPP_D
CONVST connects to UPP_CLK
CS connects to UPP_ENABLE
RD connects to UPP_START
WR seems to connect with UPP_START as well, but only on UPP_START available for 1 channel.
BUSY connects to I/O ports?
Which pin of adc should connected to UPP_WAIT?