This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

Integration TIDA-00096 and TIPD111?

Prodigy 50 points
Alexander Riftine

Replies: 3

Views: 753

Hello Everybody,

I want to know is it possible to integrate  TIDA-00096 ECG monitor and  TIPD111 hardware pace detector.

Thank you in advance.

Prodigy 50 points
Alexander Riftine
  • Mastermind 38475 points
    Praveen Aroul
    Hi Alexander,

    I've moved this post from the Medical Forum to the Precision Data Converter Forum, where the TI design TI-00096 is supported. I'm sure you'll find an answer here.

    Regards

    Praveen

    TI makes no warranties and assumes no liability for applications assistance or customer product design. You are fully responsible for all design decisions and engineering with regard to your products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning your designs.

  • Mastermind 38745 points
    Brian Pisani

    In reply to Praveen Aroul:

    Hello Alexander,

    TIPD111 requires a ECG signal to scan for pace. ADS1293, the AFE on TIDA-00096, has the ability to output the multiplexed ECG channels to either the RLDIN or WCT pins, but I do not believe those nets are brought to headers on TIDA-00096. Perhaps someone more familiar with the ADS1293 can comment.

    Brian
  • Genius 16890 points
    Michael Stout

    In reply to Brian Pisani:

    Hi Alexander,

    The Pace signal is available on the WCT pin of the ADS1293. It is not brought out to a connector on the TIDA-00096 design, but is brought to a via that you might be able to solder to.

    Mike

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI worldwide | Contact us | myTI login | Corporate citizenship

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2021 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy policy | Terms of use