DLPLCRC900DEVM: DLPLCRC900DEVM and DLPLCR50XEVM video mode

YU-CHEN CHOU

Part Number: DLPLCRC900DEVM

Please ask the video mode on the gui, is it possible to project the screen given by the computer with HDMI? For example, I want to use my DMD to play my mp4 video, how do I set it up?

over 2 years ago

0 SHIVAKUMAR R over 2 years ago

TI__Expert 3020 points

Hi YU-CHEN,

Let me check and get back on this.

0 Fizix over 2 years ago in reply to SHIVAKUMAR R

TI__Mastermind 43205 points

Hello YU-CHEN,

You will need to go into the GUI under Video Mode/Source Settings and turn the ITE6535 Receiver to HDMI and hit "Set". On the same page, I believe you will need to set the Pixel Mode to Dual and hit "Set"

Just to be clear, it will put the patterns on the surface of the DMD. To project an image you will need a light engine

I hope this helps.

Fizix

DLP®︎ products

DLP products forum

DLPLCRC900DEVM: DLPLCRC900DEVM and DLPLCR50XEVM video mode