Tool/software:
Hi.
I understand that DLP2000EVM typically receives power through a 5V 3A power jack.
Currently, I am integrating the DLP2000EVM with a Raspberry Pi to build a robot, and I would like to use a power bank to supply power.
Specifically, I am considering using a power bank that supports 5V 3A and connecting it to the DLP2000EVM via a USB to DC cable.
Could you please confirm if this method of power supply is feasible for the DLP2000EVM? Or if there are any other recommended methods for supplying power in this setup, I would appreciate your suggestions.
Thank you for your assistance.