DS90UB929-Q1EVM: design files

FRANK1

Part Number: DS90UB929-Q1EVM

Hi Team,

A customer need the assembly holes size and dimensions.

Can you share me the design files and gerberdata?

If it's convenient for you, can you help me to measure it due to we have limited access on these software to use?

My email is X1054259@ti.com

Thanks.

Regards,

0 FRANK1 over 3 years ago

Hi Sir,

Maybe, I can use coordinate data and drill data to check the dimensions information if you can share me the gerberdata.

Thanks,

0 Aaron Heng over 3 years ago in reply to FRANK1

Hi Frank,

Let me review the design file, and I will get back with you by tomorrow.

Aaron

0 FRANK1 over 3 years ago in reply to Aaron Heng

Hi Aaron,

Thank you for your support.

Waiting your feedback.

Regards，

+1 Aaron Heng over 3 years ago in reply to FRANK1

Hi Frank,

I was able to find the design file. The dimension for the mounting hole is 3.6 x 5.615 inches, and the hole size is 125.984 mils.

Hope this helps. Let me know if you have additional questions.

Aaron

0 FRANK1 over 3 years ago in reply to Aaron Heng

Hi Aaron,

Thanks a lot.

0 Aaron Heng over 3 years ago in reply to FRANK1

Hi Frank,

I am glad that I was able to help you. Let me know if you have additional questions. I will close this ticket.

Aaron

Interface forum