• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 125 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPD12S521: No issue of connection between 5V pull-up and 5V_OUT

Motoyasu Hattori
Genius 9345 points
Part Number: TPD12S521

Hi,

My customer wants to connect “5V_OUT pin on output side” with 5V power for pull-up of DCLK_OUT/DDAT_OUT, and never connected 5V on input side and 5V on output side.   Is it correct connection?  Please advise us.

Thanks and best regards,
M.HATTORI.

  • 0
    TI__Expert 8980 points

    Hi, Motoyasu,

    Can you push the meeting behind? I think we'd better have a meeting to discuss this first so that I can understand your questions better.

    As I mentioned before, it's an old device, so after our discussion I might need to check the design database for the answer.

    Bob

  • 0
    TI__Expert 8980 points

    Hi, Motoyasu,

    Since no more reply, I will close this tread first. Please feel free to let me know if further question. If you are available, please schedule a meeting to discuss this.

    Bob