• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 160 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS26F31MQML-SP: RS485/422 driver selection

Adam Daluga
Expert 5780 points
Part Number: DS26F31MQML-SP

Hello,

I am looking for a rad hard RS422/485 driver. Some of the alternatives don’t have TID ratings in the brochure I have, so I don’t know which one to choose. Does it really matter since they are bipolar based?

 

I am aiming for 50krad TID, though I can deal with the space enhanced plastic around 20-30 krad if it helps with lead times. Any advice on what would work best?

Thanks,
Adam

 

 

  • 0
    TI__Guru 65352 points

    Adam,

    National did not release a radiation qualified version of the DS96F174/5, and unfortunately I don't have the history on that decision.

    The DS196F174/5 have received TID testing at low dose rate and passed 100 krad, if you email me directly at e-hackett@ti.com I can share some test reports with you, as well as share more information about alternative devices available.

    Since the rest of this thread will be handled through email, I'll be closing this thread now.

    Regards,

    Eric Hackett