USB-C-PD-DUO-EVM: Question Asking

Hello,

From the USB-C-PD-DUO-EVM Users Guide, follow up to Figure 4 in the guide.

Then follow these steps:

From the top menu select Project-> New Project

A new window will appear asking 'Which device you are using?'

Select 'TPS65987DDH'

Then select either:

'TIDA-050012 Source Board' for the Source.bin file

OR

'TIDA-050014 Sink Board' for the Sink.bin file

The project will load the correct binary and project.

Follow the rest of the steps in the EVM User's Guide EXCEPT on Figure 5 instead of Binary -> Flash from Binary File. Do Binary -> Flash from current project

Hope this helps!