This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25833-Q1: Current is also change with Rimon Value

Part Number: TPS25833-Q1

Hello,

I am using TPS25833-Q1.

I design a basic Dual port Type-C charger. I set the Rlim value to 26.1k ohm to set the current 1.5A. And I also set the Rimon value to 4.7k ohm to make cable compansation. ( I set Rwire is equal to 100mohm. I did not use Mosfet).

An interesting thing is " Although Rlim value is stable, current is also change with Rimon value." Here is the datas that I measured: 

RIMON:  4.64K ohm 4.7K ohm  12.1k ohm
RLIM: 26.1k 26.1k 26.1k
Maximum Current to make Voltage Stable on 150m ohm Cable Resistance   1.516A 1.465A 1.485A
Stable Voltage with 150m ohm  Cable Resistance 4.96V 4.9897V 5.27V

Is it make sense?

Please find the schematic in the attachement. Actually, it is not my schematic but I copied every edge of it. Only differances are Rimon and Rlim values.

Regards,

Mehmet.6305.TIDM117 (7).PDF