DS25CP104A: Can DS90UB925 be connected to DS25CP104A then connect to DS90UB926 ?

Kygo Cheng

Part Number: DS25CP104A

Hi Team,

Because customers have quality testing and production line mass production requirements, the LVDS needs to be processed "one-to-many".

At present, the customer uses DS25CP104A to disperse the LVDS signal source into four, can 925 be connected to DS25CP104A then connect to 926 ? THX

over 2 years ago

0 Malik Barton57 over 2 years ago

TI__Guru 64326 points

Hi,

Can you share the full part numbers?

0 Kygo Cheng over 2 years ago in reply to Malik Barton57

TI__Expert 6830 points

Hi Malik

At present, the customer uses DS25CP104A to disperse the LVDS signal source into four, can DS90UB925 be connected to DS25CP104A then connect to DS90UB926 ? THX

0 Malik Barton57 over 2 years ago in reply to Kygo Cheng

TI__Guru 64326 points

Hi,
Your issue is being assigned to the appropriate engineer. Due to the US Holiday there may be a delay in response to your post. We apologize for any inconvenience.

+1 Malik Barton57 over 2 years ago in reply to Malik Barton57

TI__Guru 64326 points

Yes these devices are compatible.

Interface

Interface forum

DS25CP104A: Can DS90UB925 be connected to DS25CP104A then connect to DS90UB926 ?