Other Parts Discussed in Thread: TUSB216IEVM, TUSB216, TUSB216EVM
Host PC has USB2.0 port and USB device supports only USB1.1
USB cable (about 2meter) locates in bad noise environment.
So, device's USB connection is unstable.
I purchased TUSB216IEVM and tested it.
But TUSB216 enables signal compensation only at High speed mode.
As mentioned above, however my device supports only USB1.1 full speed,
TUSB216 did not enable signal compensation, it just bypassed.
I found other USB 2.0 redriver model, but they all have same function.
(low speed & full speed bypass, high speed only signal compensation)
In this case, can I use other type signal conditioner not USB redriver?
For example, LVDS interface signal conditioner on USB1.1 path
Is it possible idea? If it is possible, please recommend proper conditioner.
