Team,
Our customer is asking for the current required by TS3USB31 in the following conditions.
VCC = 3.8V
OE\ = 1, disabled
D+/D- = low
I don't see this or a similar spec in the datasheet. Can you help please?
Thanks,
Darren
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Team,
Our customer is asking for the current required by TS3USB31 in the following conditions.
VCC = 3.8V
OE\ = 1, disabled
D+/D- = low
I don't see this or a similar spec in the datasheet. Can you help please?
Thanks,
Darren
Hi Brian,
I see the 1uA at the top of the datasheet, but is that with OE pulled high? It's a very unusual way for us to write that in the datasheet.
It says "Low Power Consumption"
Usually we would say
"Consumption in Low Power Mode" or "Consumption while disabled"
Thanks,
Darren
it says switch off, means OE pulled high.
each system guy may have different style to write datasheet. I don't know who is the owner of this datasheet, it's very old device.
Regards
brian