Hello, team,
We have one automotive application that requires for a source device with USB3 and DP switch. I only find TUSB1046-DCI can meet this requirement but not AEC-Q100 device.
Do we have plan for a automotive switch for this application?
BTW, I have one question on the application. How can our device detect whether the insertion equipment requires for USB3 or DP signal? If detect as DP, just through PD controller CC1/CC2 communication then the PD controller send CTL0/CTL1/FLIP to TUSB1046 and send out HPD to host to start link-training?
Thanks.
Johnny
Thanks.
Johnny