TPD6S300: Waveform during OVP to recovery

Seiya Kubo

Prodigy 80 points

Part Number: TPD6S300

Could you please share the waveforms up to the state where the OVP is activated, recovered and back to normal?

over 2 years ago

0 Ghouse Mohiuddin23 over 2 years ago

TI__Expert 5290 points

There is a scope capture provided in this EVM userguide, it focuses on response for OVP. I hope this helps.

TPD6S300 Evaluation Module User's Guide

0 Seiya Kubo over 2 years ago in reply to Ghouse Mohiuddin23

TI__Prodigy 80 points

I checked the userguide, but it describe only OVP is activated. I would like to also need the waveform after OVP until it returns to the normal state.

0 Ghouse Mohiuddin23 over 2 years ago in reply to Seiya Kubo

TI__Expert 5290 points

Seiya,

Why is the back to normal state time critical for customer? We don't have this waveform. PD controller has 200msec of debounce time. Recovery is quick and not significant compared to this 200msec.

Interface

Interface forum

TPD6S300: Waveform during OVP to recovery