• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 157 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HD3SS3202: Pin Swap polarity ; is it possible PCB routing?

kwangsug lee
Prodigy 30 points
Part Number: HD3SS3202

I designed USB TYPE-C using HD3SS3202. 

I desigend schematic 1st picture, but TX line was twisted.

So I will swap the pins of A0p and A0n as shown in the 2nd picture. Is it possilbe methods?

A0p : USB3.0 TX -  (negative)  --------> B0p : USB3.0-C TX - (negative) , C0p : USB3.0-C TX - (negative) 

A0n : USB3.0 TX + (positive)    --------> B0n : USB3.0-C TX - (positive) , B0n : USB3.0-C TX - (positive) 

Regards

Kwangsug