• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 91 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UR241-Q1: RGB666 interconnect and vodsel

O'Mellin
Expert 4935 points
Part Number: DS90UR241-Q1

team, can you please validate the interconnect of UR241 in RGB666?

Additionally, for VODSEL : how can customer know what settings to use ? is there a given cable length above which high LVDS voltage is recommended ? or is there a test to perform to figure out which setting to use? if so what does this test consist of?

  • 0
    TI__Expert 3595 points

    Hello,

    Yes, those connections are okay. Please make sure to use the same connections on the deserializer side as well. 

    The customer can either test the signal eye at RIN+/- like shown in section 9.2.1.3 in the datasheet, or they can run BIST which is described in section 8.3.9 in the datasheet.

    Thank you!

    Lysny