• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 116 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LV019: Can i use DS90LV019 for 330 Ohm input imedance RF Driver

Shyam Daram
Expert 1175 points
Part Number: DS90LV019

Hi,

I have a RF Driver to be driven through an FPGA

Below are RF Driver parameters

Can i use DS90LV019  with output temination impdeance as 330 Ohm

If not kindly suggest a LVDS to TTL converter for above kind of inputs.

Let me know if below is correct way to do it ?

  • +1
    TI__Mastermind 25040 points

    Hi Shyam,

    Per the datasheet, it is recommended to use termination resistors that best matches the differential impedance of your transmission line. 

    Hence, it should be okay if there isn't any impedance mismatch for transmission line effects, thanks.

    Best Regards,

    Michael.