DP83848C: EMC - Conducted Susceptability

Michael Jeong1

Part Number: DP83848C

Hello Expert,

Do you have a design guide or related document about schematic to improve EMC test which is Conducted Susceptability - 10V/m.

There is a phenomenon that the ping is cut off under testing EMC - Conducted Susceptability - 10V/m.

If you need their schematic, could you please share your e-mail address?

Best regards,

Michael

0 James Lee over 1 year ago

Michael,

Here are some application reports to support this issue:

If required, please feel free to send over a schematic for a schematic check.

Sincerely,
Jason Lee

0 Michael Jeong1 over 1 year ago in reply to James Lee

Expert 2610 points

High Jason,

Thanks for your kind support.

Here is my e-mail address : michael.jeong@arrow.com

Could you please send a e-mail first? and then I will share schematic by e-mail.

Best regards,

Michael

0 James Lee over 1 year ago in reply to Michael Jeong1

Michael,

At your convenience, please fill this out and share to j-lee6@ti.com

Sincerely,

Jason Lee

0 James Lee over 1 year ago in reply to James Lee

Michael,

I sent over the completed schematic review via email; Please let me know your feedback after receiving such. Thanks!

Sincerely,

Jason Lee

Interface forum