• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 129 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLIN1029-Q1: use of standard MCU UART

HS FAE Germany
Mastermind 30505 points
Part Number: TLIN1029-Q1

Hello,
can I use the TLIN1029 with a standard MCU UART and what are the limitation? Do you have an app note or SW example for this?
Application is an industrial pump and customer is more interested in the 1-wire topology (not interested in flexible baudrate or something else).

Regards, Holger

  • 0
    TI__Guru 60392 points

    Holger,

    Yes, MCU UART can be used to drive LIN, and in fact I've seen this done in most applications where the MCU does not have a dedicated LIN stack. The only example in TI that I know of is in the C2000 processor group where they have developed a LIN stack on one of their processors using UART. Our group that develops the LIN transceivers does not have a software example for this.

    Regards,

    Eric Hackett