• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 189 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS250DF810: Whether can be used under 100G situation

Xenon Li
Intellectual 1505 points
Part Number: DS250DF810
Other Parts Discussed in Thread: DS280DF810, DS250DF410

Dear Team,

Happy new year!

I have a few questions that need your support:

1. Do DS280DF810 and DS250DF810 have any other difference except the speed difference?

2. Could DS250DF810 and DS250DF410 be used under 100G CR condition (100G optical port out of the panel or 100G DAC cable)?

Thanks a lot!

Best regards,

Xenon Li

  • 0
    TI__Mastermind 19225 points
    1. The Data rate range is the main difference between these two part numbers. They otherwise share the same design and feature set
    2. Yes. Either of these part numbers may be used for CR applications. For CR case the host would simply need to disable link training as these retimers do not implement link training state machine

    Regards,

    Rodrigo Natal