• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 144 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS25BR150: DS25BR110

Ray Vincent Aranzaso
Genius 14685 points
Part Number: DS25BR150
Other Parts Discussed in Thread: DS25BR110

Hi,

Good Day. 

I actually use DS25BR150, but I would like to use DS25BR110. On my board, pins 1 and 4 are NC and I would like to know if it is a problem with the DS25BR110 because for this PN indicates pins 1 and 4 in GND or VCC.

And I would like to know if I leave these pins 1 and 4 NC what is the assumed state?

Please advise. Thank you very much.

Best Regards,

Ray Vincent

  • 0
    TI__Guru* 92040 points

    Greetings,

    On DS25BR110 pins 1 & 4 are EQ0 and EQ1 - input equalization control. These two pins are LVCOMS and need to be driven either high or low. We should not leave these pins NC(No Connect) since floating LVCMOS inputs could be prone to noise and cross talk.

    Regards,Nasser