Hi.
The TS3USB31 datasheets that the NC pin may be connected to ground or left floated on page 3, but then states that the NC pin should be left floating on page 13.
Could Ti confirm whether NC may be connected to GND?
Thanks for the help.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi.
The TS3USB31 datasheets that the NC pin may be connected to ground or left floated on page 3, but then states that the NC pin should be left floating on page 13.
Could Ti confirm whether NC may be connected to GND?
Thanks for the help.
NC pin just floating.
Best
Brian
Hi Brian. What happens if this pin is grounded? In our design, we followed in the instructions in the "Pin functions" table and grounded the N.C pin 7.
Hi,
Pin 7 can be NC or GND or VCC because it does not have any internal connection.
Best,
Stanton
Thanks for the confirmation Stanton, that's a relief as our design is in production.
I also reported the potential confusion in the datasheet using the "submit document feedback" link inside the datasheet.
Yes! Definitely a relief. Sorry for the confusion.
Thanks for reporting this feedback. We will work to clarify.
Best,
Stanton