• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 88 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB216I: TUSB216I circuit for surrounding parts value

Kevin Huang8
Genius 3185 points
Part Number: TUSB216I

Hi Team,

Please help confirm the TUSB216I circuit for surrounding parts value.

 

  • 0
    TI__Genius 16770 points

    Hi Kevin,

    Looking at your schematic, it seems like you are using BOOST level 1 and RXSen on High. Please confirm this. Additionally, please keep in mind that using RX_Sen at high in a low-loss system may result in performance issues, such as over/under-shoot in the signal, which could cause disconnects if they pass the USB disconnect threshold.

    Do you have the spec for that Ferrite bead? If so, please ensure the characteristics follow what TI recommends in its typical application, 100Ohms at 100MHz.

    Otherwise, the schematic seems correct to me.

    Thanks,

    Ryan