• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 268 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLIN1028-Q1: Schematic Review

Nikola Zlatanovski
Prodigy 305 points
Part Number: TLIN1028-Q1
Other Parts Discussed in Thread: ESD1LIN24-Q1

Hello,

 I was given the following schematic, and I am reviewing it in parallel to this. Please let me know if it looks good. 


Thanks!

  • 0
    TI__Mastermind 25055 points

    Nikola,

    Usually there is a capacitance requirement for the LIN bus of nominally 220 pF. It might be located elsewhere on the schematic, so please confirm whether this is included.

    Additionally, I'm assuming that this is a responder node since there is no commander node pull-up outside the transceiver, but it would be worth confirming just to make sure.

    If the customer becomes interested in additional ESD protection, please keep in mind ESD1LIN24-Q1 for this purpose.

    Best,

    Danny