DS90UB949-Q1: 949-948 cross FPD-Link III ports.

Ilyas SIMSEK

Part Number: DS90UB949-Q1
Other Parts Discussed in Thread: DS90UB948-Q1

I have one DS90UB949-Q1EVM. And I have a display with a DS90UB948-Q1. But the FPD-Link ports on the connectors are crossed. As shown in the figure.
Does this link work?

BRs,

Ilyas.

over 1 year ago

0 Ikram Haque over 1 year ago

TI__Genius 17640 points

Hi Ilyas,

From what we know, this should work. Though we have not tested this yet. You could set this up in Dual Link mode with the EVMs and test it.

Is there in any special use case for this? Is this for replicate mode?

Best regards,
Ikram

0 Ilyas SIMSEK over 1 year ago in reply to Ikram Haque

Prodigy 20 points

Hi Ikram,

My question is for Dual Link Operation mode.

BRs,
Ilyas.

+1 Ikram Haque over 1 year ago in reply to Ilyas SIMSEK

TI__Genius 17640 points

Hi Ilyas,

Yes this should work with Dual Link. Let us know if you have any further queries.

Regards,
Ikram

Interface

Interface forum

DS90UB949-Q1: 949-948 cross FPD-Link III ports.