Hi team,
Customer has been placed dumping resistor to reduce EMC between redriver and connector.
Do you have suggested value for dumping resistor? Or do you recommend not to put the resistor?
Best regards,
Hayashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Customer has been placed dumping resistor to reduce EMC between redriver and connector.
Do you have suggested value for dumping resistor? Or do you recommend not to put the resistor?
Best regards,
Hayashi
Hayashi-san
Please see Table 9-2, the damping resistor recommended value is 0 to 2.5ohm. It needs to be tuned depending on the output signal quality.
Thanks
David