Hi, Support Team
Here is our client function block as below chart:
if MCU no software and no EEPROM, so only power on TI TUSB4020 could possible to work?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, Support Team
Here is our client function block as below chart:
if MCU no software and no EEPROM, so only power on TI TUSB4020 could possible to work?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Hi Lawrence:
Your block diagram will work, there is no need for firmware or software for TUSB4020 to work with it's default setting.
Regards
Brian
Hi, Brian
if TUSB4020 no need for firmware or software, so we can send data from A port to B(MCU) to test the channel is connect or not. is correct?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Hi Lawrence:
Yes, NXP SOC B should able to detect A device. what is their application?
Regards
Brian