Hello team,
My customer would like to use this device without any EEPROM or I2C/SMBus connection.
Is this device going to operate stand-alone, if the customer only use default register setting?
Best Regards,
Kei Kuwahara
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello team,
My customer would like to use this device without any EEPROM or I2C/SMBus connection.
Is this device going to operate stand-alone, if the customer only use default register setting?
Best Regards,
Kei Kuwahara
Kei Kuwahara
The TUSB8043A can operate stand-alone without EEPROM or SMBus. You need to use EEPROM or SMBus if you want to use your own VID/PID or provide specific hub configuration.
Thanks
David