TIOL1115: IO-Link headless build

Hello Ahmed,

Are you referring to a Master stack, or a Device stack?  

Regards,

Jonathan

Master one. We'll be on the upper liar of communication and we'll talk to master unit to talk to sensors, actuators.. etc "shouldn't this be a master stack?".
Also i checked most sdk examples which provides io-link libraries as binaries and i was wondering if there's any one which has cortex m cpu. 
All target i checked had cortexA

The only IO-Link Master stack I am aware of is for the Sitara AM243x processors which uses the Programmable Real-Time Unit (PRU) to control to handle the required signal timing requirements in the IO-Link protocol.  I am not sure if that could be ported to different processors because I only support the TIOL family of transceivers and not the processors for any associated software stacks.  I would suggest asking your question in the embedded processor forum which supports the AM243x MCU in order to get more direct support on the IO-Link Master stack.

There is a reference design and BoosterPack that is compatible for the Sitara AM243 LaunchPad and master stack called the BOOSTXL-IOLINKM-8 (Link).

I would also recommend the TIOL1125 for a Master application instead of the TIOL1115 because the TIOL1125 has a Master Mode.

Regards,

Jonathan

Thanks Jonathan. It really helped