This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear TI Team:
Due to our PCB size is big and trace is too long, our team plan to do SI(Signal Integrity) simulation.
Our SI team ask for parameters of <the tolerated insetion loss & the limiation of trace loss >,
For I2C or I2C Mux, do you have these parameters value, or could you pls provide other information you think which is helpful for our SI simulation.
Thanks
Best Regards
Lisa
There parameters are not specified for slow digital devices (and I²C is quite slow).
What matters is that any ringing does not cross the VIL/VIH thresholds.
Hi Clemens:
Could you also share the IBIS link for PCA9548A and PCA9546A,Thanks
Best Regards
Lisa