Tool/software:
<Converting from email>
We're getting ready to start our first card design using the 25G Ethernet retimer. I found three different decoupling solutions in TI's documentation. Which one do you recommend we use?
Data sheet
----------
4 x 0.1 uF
2 x 1.0 uF
Schematics
----------
6 x 0.1 uF
1 x 1.0 uF
1 x 10 uF
Allegro brd file
----------------
1 x 0.1 uF 0402
2 x 0.22 uF 0201
5 x 0.1 uF 0201
