• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 66 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TL16C754C: Refence schematic

GARETH OU
Mastermind 9725 points
Part Number: TL16C754C
Other Parts Discussed in Thread: TL16C750E

Tool/software:

Hi

Could you help provide the reference circuit of TL16C754CIPMR

  • 0
    TI__Guru 56040 points

    Hi Gareth,

    We don't have a reference schematic for that device. We do have some sort of reference for TL16C750E https://www.ti.com/tool/TL16C750EEVM

    You can find it in the EVM user's guide. Essentially you just need to connect the parallel pins, address, CS, IOR, IOW, INT, TXRDY, RXRDY to the processor and use the TX/RX to interface with an RS232/485 or another UART TX/RX net. Some of the pins you may not use depending on how you write your software.

    -Bobby