This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THVD4411: review the schmatic

Part Number: THVD4411

Tool/software:

HI sir

could you help to double the schematic? advise?

thanks

  • Alex,

    Thanks for bringing this to E2E!

    • Charge pump capacitors are all correct.
    • Voltage inputs (VCC1, VCC2, VIO) are all supplied with either 3.3V and 5V, my assumption is that one of the 0 ohm resistors on each of these pins won't be populated. Please make sure to not place two supplies on one pin.
    • All other pins are connected to the controller and are correct.

    Please let us know if there are any other questions.

    Regards,

    Eric Hackett