DS90UB962-Q1: The register configuration table for DS90UB962

Eric Mo

Part Number: DS90UB962-Q1
Other Parts Discussed in Thread: ALP, USB2ANY

Tool/software:

Hi Team,

The customer uses DS90UB962(Serializer:DS90UB933), The following is the application schematic. How to set the internal registers of DS90UB962 using ALP software? Do I have to connect to DS90UB962EVM to use ALP software? Can you help me download the DS90UB962 register configuration table?

Thanks!DS90UB962.pdf

over 1 year ago

0 Hamzeh Jaradat over 1 year ago

TI__Guru** 115100 points

Hello Eric,

can you also share the schematic of the UB933? I need to see it for making the correct settings.

0 Eric Mo over 1 year ago in reply to Hamzeh Jaradat

Intellectual 1000 points

Hello Hamzeh,

+ The schematic of the UB933.

0 Hamzeh Jaradat over 1 year ago in reply to Eric Mo

TI__Guru** 115100 points

Hi Eric,

I can't see the attachment. Can you resend?

Eric Mo said:
How to set the internal registers of DS90UB962 using ALP software?

Once you open the ALP, make sure you are connected to the UB962 and you see the correct device ID address. Then go to the registers Tab and do the changes you want to do.

Eric Mo said:
Do I have to connect to DS90UB962EVM to use ALP software?

No, ALP can be used with any board if you use the USB2ANY dongle or an Aardvark dongle.

Please refer to this document to know more.

Using ALP and USB2ANY.pdf

Interface

Interface forum

DS90UB962-Q1: The register configuration table for DS90UB962