• State Resolved
  • Locked Locked
  • Replies 5 replies
  • Subscribers 32 subscribers
  • Views 1262 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS25CPxxx - Using with a single end input signal

Kawai
Guru 19775 points

Hi Team,

Is there any good way to drive DS25CPxxx family products with a single end input signal ?

I believe DS25CPxxx does not have internal bias, so I think below schematic could be used. Could you give us your advice and recommendation if any ?

Thanks in advance.

Best Regards,

Kawai