We are using CJMCU-230 which has SN65HVD230 CAN transceiver embedded in it.
Our setup is to achieve the CAN msg communication between 2 CAN nodes.
Using CAN utilities , we are trying to test CAN interfaces by sending and receiving data's in external loopback mode (can0 <---> can1).
But we are not able to achieve the proper target. There is no error on sending the messages can0. But error in receiving at can1. Similar is the case while sending from can1 and error at can0 while receiving.
Hope someone can help us further with this information to achieve the communication between the 2 CAN nodes.
Hoping a quick reply. Thanks in advance.