• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 478 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDS049: using Flat cable

Hirotaka Matsumoto
Guru 27545 points
Part Number: SN65LVDS049
Other Parts Discussed in Thread: DS90LV049

Hi all

Would you mind if we ask SN65LVDS049?
Do you have any experience to use SN65LVDS049 with Flat cable?
Off course, we think it depends on cable length and attenuation. 

Kind regards,

Hirotaka Matsumoto

  • 0
    TI__Mastermind 43795 points

    Hi,

    The DS90LV049 and SN65LVDS049 have been used with flat cables before.  The inital application for this design was a multi-function printer.

    I recommend to use a flat cable with controlled impedance that matches the PCB signal impedance.  This should allow for good signal integrity up to the point when attenuation could impact the signals.

    Regards,

    Lee