TL16C752C: Register interrupt setting

TS Yang

Genius 4800 points

Part Number: TL16C752C

Hello,

When the TL16C752C chip receives data to the buffer,

How to set up to enable INT-A (or INT-B),

What should I do to clear it after interrupt processing?

thanks,

over 6 years ago

0 Francisco Javier Zamudio over 6 years ago

TI__Expert 5455 points

Hello TS

You have to enable the bit 3 of MCR register and the interruptions are at register IER. You can use different options for this Interruption.
If you want to clear the interruptions, you can disable the same bit of MCR or change the status of the interruption.

Regards
Francisco

Interface

Interface forum

TL16C752C: Register interrupt setting