DS90UB929-Q1EVM: DS90UB929-Q1EVM board setup

David Dong

Part Number: DS90UB929-Q1EVM

my DS90UB929-Q1EVM doesn't work, the board current only few mA, not power on correctly. i am wondering whether the board setup (such as Jumper, switches) is correct. can you help to share a reference picture with correct board setup? below picture is current setup. thanks

over 6 years ago

0 Palaniappan Manickam over 6 years ago

TI__Genius 10475 points

Hello,
You can look at the 929 EVM user guide SNLU172 on the web. It provides the default jumper and switch settings and includes a quick start guide.

0 David Dong over 6 years ago in reply to Palaniappan Manickam

TI__Prodigy 180 points

Yes, I found it's caused by poor connection with board connector of 12V eventually. thanks.

Interface

Interface forum

DS90UB929-Q1EVM: DS90UB929-Q1EVM board setup