DS90UB929-Q1EVM: FPD III interface cable to HDMI

Adnan Zatarah

Part Number: DS90UB929-Q1EVM

Hello,

one of our customers is looking for a 2-3m long cable that is compliant to the FPD III interface.
He would like to get the data from FPD III on the board to a display with HDMI interface.

Can you possibly suggest a specific cable which is compliant to these specifications?

Thank you very much.
Best regards
Adnan

over 6 years ago

0 Palaniappan Manickam over 6 years ago

TI__Genius 10475 points

Hello,
There are many automotive cable suppliers you can look at or consider. Some of the names include Leoni, Rosenberger, Molex.
Leoni's cables include DACAR 302, 462 (both coax), DACAR 535 (STQ) with different lengths.

0 Adnan Zatarah over 6 years ago in reply to Palaniappan Manickam

Intellectual 490 points

Hello Palaniappan,

many thanks for your response!

This sounds like the cables need to be assembled using the matching connectors and i.e., one of the cables you mentioned...

You wouldn't by chance also know any complete cable assemblies from Molex or Rosenberger that could be used out of the box to connect the board to a HDMI display?
Or would I need to get in touch with these suppliers directly to find out?

Many thanks..

Adnan

0 Palaniappan Manickam over 6 years ago in reply to Adnan Zatarah

TI__Genius 10475 points

You can check with the cable suppliers directly.

Interface

Interface forum

DS90UB929-Q1EVM: FPD III interface cable to HDMI