TPD1E05U06-Q1: Initial PCB Routing

Shmuel Davis

Part Number: TPD1E05U06-Q1

I have a design using the TPD1E05U06-Q1 to protect our USB 3.0 Type C signals. We have just completed the initial routing for these signals. Is there someone from TI who can look at the routing and check it ?

over 5 years ago

0 Cameron Phillips over 5 years ago

TI__Genius 12410 points

Hello,
You can send it to me if you would like. However this being a 1 channel device, as long as the part is close to the connector the layout should be fine.

0 Shmuel Davis over 5 years ago in reply to Cameron Phillips

Expert 2920 points

Do you have an email address I can send you design ?

0 Cameron Phillips over 5 years ago in reply to Shmuel Davis

TI__Genius 12410 points

Shmuel,
My email is on my signature to this post.
c-phillips@ti.com

0 Shmuel Davis over 5 years ago in reply to Cameron Phillips

Expert 2920 points

Cameron,

Thank you so much - I sent you the email - please let me know when you get it....

Regards

Shmuel

Interface

Interface forum

TPD1E05U06-Q1: Initial PCB Routing