This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB544: How to set the TUSB544 display port configuration via PD controller?

Part Number: TUSB544

Hi Sir

We have a PD and EC controller in system and want to know if display port dongle is insert.

When TUSB544 get the HPD signal. What's the procedure/setting to control the TUSB544 via PD controller to acheive display port function?

By control CTL1/CTL0/FLIP these pins? Please advise, thanks!!

Best regards.