Other Parts Discussed in Thread: DP83867E, DP83867IS, DP83867CS
With the TLK10232 working in 1GBASE-KX mode, is it fully compatible with SGMII (Serial GMII)?, and with SGMII transporting 100/100M ethernet? (it is 1,25 Gbps, 8b/10b coding)
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thank for your answer, Malik,
In my aplication, the TLK10232 will be conected to a SFP/SFP+ connector at HS side (10GBase-R or 1000baseX) and to a FPGA at LS side. In the connector can be inserted a SFP+ or a SFP.
It will work in 10Gbase-R (XFI to XAUI with SFP+) or in 1000baseX mode or general serdes mode (with SFP). I will use both channels with the same configuration
The SFP may be a electrical SFP module, in this case the frame is SGMII.
One more questions, how must be configured the TLK10232 to work in general serdes mode?
Best regards,
Please see section 2.4 Operating Modes and Table 2-3. TLK10232 Operating Mode Selection in TLK10232 datasheet the describe how to put the device into General Serdes (10G) Mode.