TMS320C6747: SCANSTA111 interface to TMS320C6747 and FPGA

Yunus Karaborek

Part Number: TMS320C6747
Other Parts Discussed in Thread: SCANSTA111, , SCANSTA101

Dear Team

One of my customer wants to use SCANSTA111 to make JTAG bridge to interface FPGA and C6747 DSP. They are able to load the code to FPGA but not DSP. They can connect and load the image to DSP separately from JTAG but not when they use SCANSTA111. Could you please comment how to make this bridge using SCANSTA111 to bridge FPGA and TMS320C6747?

Best Regards

Yunus

over 5 years ago

0 Yaser Ibrahim over 5 years ago

TI__Genius 10250 points

Hello Yunus,

We will look into this and get back to you.

Regards,
Yaser

0 Yaser Ibrahim over 5 years ago in reply to Yaser Ibrahim

TI__Genius 10250 points

Hello Yunus,

Sorry for the late reply. Unfortunately, I am not sure why this is failing. Have they looked at the documents in the product folder (Reference Guide, etc.)? There is also another useful document that may be helpful (please see attached). The title says SCANSTA101, but it covers SCANSTA111/112 as well. I hope this helps.

Regards,

Yaser

5488.SCANSTA101_Design_Guide2010.pdf

Interface

Interface forum

TMS320C6747: SCANSTA111 interface to TMS320C6747 and FPGA