• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 303 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS110DF410: ds110df410 initialization

eyal makula
Prodigy 10 points
Part Number: DS110DF410
Other Parts Discussed in Thread: DS110DF111, SIGCONARCHITECT

hello,

I am using the DS110DF410 as an equalizer/reclocker for ARINC 818 channel working at 1.0625GBPS baud rate.

if i want to work with this component as a reclocker, how should i configure its register for that mode ??

Best regards,

eyal

  • 0
    TI__Guru* 92180 points
    Hi Eyal,
    You can use SigconArchitect with for example DS110DF111 updater. Then using CDR tab, you can select manual mode and use 8.5Gbps for one group and 1.0625Gbps for another group. You click on write and this would give you values needed to program to lock to these two data rate. This will update rate/subrate table and reg 0x60 through 0x64. You can use these values for your own device/board. Or if you want to lock to 1.0625G only, you put 1.0625G in both groups.
    Regards,,nasser