Other Parts Discussed in Thread: DS250DF810
Dear Team,
May I have Eye driving I2C command?
BR
Kevin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Team,
May I have Eye driving I2C command?
BR
Kevin
Hi Kevin,
The internal eye opening can be understood using several I2C registers. See datasheet section 8.5.13 starting on page 27
To get the full eye opening I recommend to use the Sigcon Architect software. Here is a link to the software page.
http://www.ti.com/tool/SIGCONARCHITECT
To get the horizontal and vertical eye opening you can read registers to understand the eye. See channel registers 0x27 and 0x28.
Regards,
Lee
Dear TI team,
Can you also provide DS250DF810 datasheet , software and command for us to do eye test?
Thanks,
George
Hi Kevin,
Please provide your email address and I can directly send you the requested DS250DF810 collateral.
Cordially,
Rodrigo Natal
HSSC Applications Engineer