DS90UH929-Q1: Required current for 3.3V VTERM

Atsushi Hirai

Part Number: DS90UH929-Q1

Hi team,

How much current capability is required for 3.3V VTERM?

On the EC table, there is only typical value (60mA) for color bar pattern but, my customer want to know it to select an optimum LDO.

Best Regards,

0 Casey McCrea over 4 years ago

Hello Atsushi,

What PCLK is the customer using for this system?

Thanks,

Casey

0 Atsushi Hirai over 4 years ago in reply to Casey McCrea

Casey-san,

Customer want to know the worst case so if higher PCLK has higher current, it should be 96MHz.

Similarly, If higher temperature has higher current or so, please take an account for it.

They don't need the actual worst case value but, need required current capability value at least.

Regards,

0 Vijaya Ceekala over 4 years ago in reply to Atsushi Hirai

Max. current in VTERM is less than 200mA

Interface forum