TCAN334: STB pin disabled LOW or HIGH?

Keith Keller

Part Number: TCAN334

Hello,

We have a question regarding the TCAN334 datasheet. It seems like there might be a datasheet error.

Table 4 shows that the device is in standby mode when STB pin is HIGH. However Figure 22 shows that the STB pin needs to go low for the device to go from normal to standby mode.

Is the text description of Figure 22 incorrect? Perhaps the text description of Figure 21 and 22 are accidentally flipped.

Or are we misinterpreting the information? Thank you, Keith

over 4 years ago

0 Eric Schott1 over 4 years ago

TI__Mastermind 49975 points

Hi Keith,

Good catch! It looks like the names of these figures were indeed flipped. Your understanding that the STB behavior should match the description in Table 4 is correct. We'll get on making the change on the datasheet to reflect the correct mode changes match their figure descriptions.

Thanks for your feedback!

Regards,

Eric

0 Max Robertson over 4 years ago in reply to Eric Schott1

TI__Guru 62910 points

Keith,

Just a heads up - the corrected datasheet is now on the web. Thanks again for bringing this up.

Max

Interface

Interface forum

TCAN334: STB pin disabled LOW or HIGH?