SN75LVCP600S: IBIS Model

Ravi John

Part Number: SN75LVCP600S
Other Parts Discussed in Thread: SN75LVCP601

Hi,

We are using P/N SN75LVCP600S in our design. Could I please request IBIS AMI MODEL.

Our trace length is 8in on Meg4 material from IC to SATA Connector. Would like to simulate if adding redriver is beneficial in this application.

Thank You,

Ravi

over 4 years ago

0 Brian Zhou over 4 years ago

TI__Guru** 111740 points

0 Ravi John over 4 years ago in reply to Brian Zhou

Prodigy 145 points

Hi,

Could You please point me to user guide/documentation for the IBIS AMI Files.

Thank You,

Ravi

0 Brian Zhou over 4 years ago in reply to Ravi John

TI__Guru** 111740 points

ibis32.txt

0 Ravi John over 4 years ago in reply to Brian Zhou

Prodigy 145 points

Hi Brian,

Could You please send me SN75LVCP600S device specific model info document please.

Thank You,

Ravi

0 Lee Sledjeski over 4 years ago in reply to Ravi John

TI__Mastermind 43795 points

Hi Ravi,

Here is a link to the model information for the SN75LVCP601. We use this IBIS-AMI model to support both devices.

wdc.box.com/.../6078x1nqdtyrpbbhy71wxf32xmod1wgl

Regards,

Lee

0 Ravi John over 4 years ago in reply to Lee Sledjeski

Prodigy 145 points

Hi Lee,

Thank You for the model.

I saw a post confirming that Redriver +ve and -ve pins can be swapped for ease of routing. (as below)

HOST TX+ ---> RX- (redriver) TX- ----> RX+ SSD

Could You please help confirm that this is ok for SN75LVCP600S.

Thank You,

Ravi

0 Lee Sledjeski over 4 years ago in reply to Ravi John

TI__Mastermind 43795 points

Hi Ravi,

Yes the pins swap as you have indicated is okay for the device and system operation.

Regards,

Lee

Interface

Interface forum

SN75LVCP600S: IBIS Model