Hi Team, is it possible to perform flashing EDID on the 929 from the 940 around 300ms. On the observation it takes around 1000ms.
Hoping for your advice.
Regards,
Mark
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team, is it possible to perform flashing EDID on the 929 from the 940 around 300ms. On the observation it takes around 1000ms.
Hoping for your advice.
Regards,
Mark
Hi Mark,
Are you trying to load an EDID from an I2C master on the display into the 929's EDID through the 940?
How are you currently trying to do it that takes around 1000ms?
Regards,
Michael W.